bc065130-daa8-4e3d-ba6e-8aff865c83b3AeroDek - Firenze Plus 0.45 mm A m² of a pitched steel roof, produced (cradle to gate LCA, only phase A1-A3)
Scope and type:
The AeroDek steel tiles are produced at the location of BMI AeroDek Herstal and they are applied
at the European market.
The background database is Ecoinvent version 3.5. It is a specific EPD for a specific product and the
type of this EPD is Cradle-to-Gate. The life cycle stages included are shown next.
Representativeness:
The input data are representative for AeroDek - Firenze Plus 0.45 mm, a product of BMI. The data
are representative for the EU market.
Calculation rules:
In the Life cycle assessment the following is included in this study: Production A1-A3.
Modules A1-A3 of the AeroDek tiles production include the following:
- The provision of resources, additives, and energy;
- Transport of resources and additives to the production site;
- Production processes on-site including energy;
- Production of additives, disposal of production residues, and consideration of related emissions;
- Recycling of production/manufacturing scrap. Steel scrap is assumed to reach the end-of-waste
status once it is shredded and sorted, thus becomes input to the product system in the inventory.
Cut-off criteria
Measurement of on-site emissions were performed by BMI and those emissions were considered.
The specific emissions that are linked to the provision of thermal and electrical energy are also
considered in the specific processes. All reported data were incorporated and modelled using the
best available LCI data. Data for the sites were cross-checked with one another to identify potential
data gaps. No processes, materials or emissions that are known to make a significant contribution to
the environmental impact of the studied products have been omitted. On this basis, there is no
evidence to suggest that input or output contributing more than 1% to the overall mass or energy of
the system - or that are environmentally significant - have been omitted.
Assumptions and approximations
In this study, primary data was used to model all on-site processes. This data was cross-checked to
identify and eliminate data gaps. Secondary data from the Ecoinvent database was as
technologically and geographically representative as possible.
Data quality
The foreground data collected by the manufacturer are based on yearly production amounts and
extrapolations of measurements on specific machines and plants. The production data refer to the
year 2020. Most of the necessary life cycle inventories for the basic materials are available in the
Ecoinvent v3.5 database.
Scenarios and additional technical information:
In the Life cycle assessment the following is included in this study:
Product stage A1-A3
The production stage consists of the extraction of raw materials, transportation of the raw materials,
processing the raw materials into materials and the production of the product. The required energy
for production, external treatments, ancillary materials, packaging material and production emissions
are included.
Declaration of SVHC:
None of the substances contained in the product are listed in the "Candidate List of Substances of
Very High Concern for authorisation", or they do not exceed the threshold with the European
Chemicals Agency.
More information:
https://www.bmigroup.com/our-solutions/pitched-roofs/metal-tiles
0The AeroDek steel tiles are produced at the location of BMI AeroDek (Herstal).AeroDek - Firenze Plus 0.45 mm is a lightweight steel tile combined of steel core with primer,
basecoat coloured, natural stone granulates coloured and a transparent overglaze. The first step
is to press the steel to have the proper profile. Then, there are 4 steps on the stone coated tiles
production line as we apply base coat, granules and overglaze and finally cure the tiles.
The Reference Service Life RSL of the AeroDek - Firenze Plus 0.45 mm is 60 years.
COMPONENT > 1%
[kg / %]
Steel with primer
confidential
Granules
confidential
Base coat
confidential
Acrylic varnish
confidential
* > 1% of total mass
EPDspecific datasetecoinvent 3.5 databaseecoinvent database (all versions)PDF EPD for 1.1.00228.2021 AeroDek - Firenze Plus 0.45 mming. Kamiel Jansen, PrimumEN 15804ISO 14025Mathias Ruinart de Brimont/Wouter Jan van den Berg, BMI Group2021-08-05T12:26:06.134571ILCD format 1.1EPD Data Format Extensions v1.206.01.000Stichting MRPI®1.1.00228.2021BMI AeroDektrueFree of charge for all users and usesAeroDek - Firenze Plus 0.45 mm1Use of renewable primary energy (PERE)Input5.950.030823.129.0MJUse of renewable primary energy resources used as raw materials (PERM)Input0.00.00.00.0MJTotal use of renewable primary energy resources (PERT)Input3.880.030820.224.1MJUse of non renewable primary energy (PENRE)Input138.03.1262.7204.0MJUse of non renewable primary energy resources used as raw materials (PENRM)Input0.00.00.3070.307MJTotal use of non renewable primary energy resource (PENRT)Input184.03.1263.0251.0MJUse of secondary material (SM)Input0.4640.00.002320.466kgUse of renewable secondary fuels (RSF)Input0.00.00.00.0MJUse of non renewable secondary fuels (NRSF)Input0.00.00.00.0MJUse of net fresh water (FW)Input0.1450.0005540.0510.197m3Hazardous waste disposed (HWD)Output0.0005971.87e-060.0008570.00146kgNon hazardous waste dispose (NHWD)Output2.00.1790.2962.47kgRadioactive waste disposed (RWD)Output0.0004081.98e-050.0002610.00069kgComponents for re-use (CRU)Output0.00.00.003060.00306kgMaterials for recycling (MFR)Output0.00.00.02220.0222kgMaterials for energy recovery (MER)Output0.00.00.00.0kgExported electrical energy (EEE)Output0.00.00.0004110.000411MJExported thermal energy (EET)Output0.00.00.0007070.000707MJGlobal warming potential (GWP)16.40.1883.5420.1kg CO2-eqv.Depletion potential of the stratospheric ozone layer (ODP)6.93e-073.51e-083.6e-071.09e-06kg R11-eqv.Acidification potential of soil and water (AP)0.05410.0008140.01870.0736kg SO2-eqv.Eutrophication potential (EP)0.007230.0001640.003470.0109kg Phosphate-eqv.Formation potential of tropospheric ozone (POCP)0.008460.0001110.001960.0105kg Ethene-eqv.Abiotic depletion potential for non fossil resources (ADPE)1.32e-055.35e-070.001780.00179kg Sb-eqv.Abiotic depletion potential for fossil resources (ADPF)209.02.950.3262.0MJ